COOLING FAN MOTOR INSTALLATION

PROCEDURE

1. INSTALL COOLING FAN MOTOR RH

   
   

   1. Install the cooling fan motor RH with the 3 screws.

      Torque:

      3.9 N*m  { 40 kgf*cm, 35 in.*lbf }

   2. Engage the 3 clamps.

   3. Connect the cooling fan motor RH connector.

   4. Install the cooling fan motor insulator with the 2 screws.

      Torque:

      2.6 N*m  { 27 kgf*cm, 23 in.*lbf }

2. INSTALL COOLING FAN MOTOR LH

   
   

   1. Install the cooling fan motor LH with the 3 screws.

      Torque:

      3.9 N*m  { 40 kgf*cm, 35 in.*lbf }

   2. Engage the clamp.

   3. Connect the cooling fan motor LH connector.

3. INSTALL FAN RH

   Note

   Do not reverse the position of the fan LH and fan RH when installing them. Doing so may damage the parts.

   
   

   1. Install the fan RH with the nut.

      Torque:

      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }

4. INSTALL FAN LH

   Note

   Do not reverse the position of the fan LH and fan RH when installing them. Doing so may damage the parts.

   
   

   1. Install the fan LH with the nut.

      Torque:

      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }

5. INSTALL RADIATOR ASSEMBLY

   Click here