FUEL PUMP ECU(w/o Rear No. 2 Seat) REMOVAL

PROCEDURE


  1. REMOVE DECK BOARD ASSEMBLY

    Click here

  2. REMOVE SPARE WHEEL COVER (w/ Spare Tire)

    Click here

  3. REMOVE REAR DECK FLOOR BOX (w/ Spare Tire)

    Click here

  4. REMOVE REAR FLOOR CARPET (w/o Spare Tire)

    Click here

  5. REMOVE REAR NO. 4 FLOOR BOARD (Except Full Size Spare Tire)

    Click here

  6. REMOVE REAR NO. 4 FLOOR BOARD (for Full Size Spare Tire)

    Click here

  7. REMOVE FRONT DECK FLOOR BOX (w/ Spare Tire)

    Click here

  8. REMOVE DECK FLOOR BOX RH (w/o Spare Tire)

    Click here

  9. REMOVE DECK FLOOR BOX LH (w/o Spare Tire)

    Click here

  10. REMOVE FUEL PUMP CONTROL ECU ASSEMBLY


    1. A01VU5E

      Disconnect the 2 fuel pump control ECU assembly connectors.

    2. A01VXGK

      Remove the clip.

    3. A01VTXQ

      Remove the 2 nuts.

    4. A01VWC8C01
      B005NIZ Turn back

      Turn back the deck trim side panel assembly LH and remove the fuel pump control ECU assembly from the vehicle body.

      Note

      Do not reuse the fuel pump control ECU assembly if it has been dropped or subjected to a severe impact.