FRONT CRANKSHAFT OIL SEAL REMOVAL

PROCEDURE


  1. REMOVE V-RIBBED BELT

    Click here

  2. REMOVE CRANKSHAFT PULLEY


    1. A01VUONC01
      *a Hold
      B005NIZ Turn

      Using SST to hold the crankshaft pulley, loosen the crankshaft pulley set bolt. Further loosen the crankshaft pulley set bolt until 2 or 3 threads remain screwed into the crankshaft.

      SST
      09213-70011   ( 09213-70020 )
      09330-00021
    2. A01VV23C01
      *a Hold
      B005NIZ Turn

      Using SST, remove the crankshaft pulley set bolt and crankshaft pulley.

      SST
      09950-50013   ( 09951-05010, 09952-05010, 09953-05020, 09954-05021 )

  3. REMOVE TIMING CHAIN CASE OIL SEAL


    1. A01VW7DC01
      *a Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, pry out the timing chain case oil seal.

      Note

      After removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.