ACCELERATOR PEDAL INSTALLATION

PROCEDURE

1. INSTALL ACCELERATOR PEDAL

   
   

   1. Install the accelerator pedal with the 2 bolts.

      Torque:

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

2. INSTALL ACCELERATOR PEDAL PAD

   
   

   1. Engage the 2 claws to install the accelerator pedal pad.

3. INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY

   Note

   
   

   • Avoid physical shock to the accelerator pedal sensor assembly.

   • Do not disassemble the accelerator pedal sensor assembly.

   • This accelerator pedal sensor assembly does not require lubrication.

   • Do not apply oil or other lubricants to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.

   
   

   1. Install the rod of the accelerator pedal sensor assembly to the accelerator pedal assembly.

   2. Install the accelerator pedal sensor assembly with the 2 nuts.

      Torque:

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

   3. Connect the accelerator pedal sensor assembly connector.

4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

5. INSTALL COWL SIDE TRIM BOARD LH (for LHD)

   Click here

6. INSTALL COWL SIDE TRIM BOARD RH (for RHD)

   Click here

7. INSTALL FRONT DOOR SCUFF PLATE LH (for LHD)

   Click here

8. INSTALL FRONT DOOR SCUFF PLATE RH (for RHD)

   Click here