ACCELERATOR PEDAL REMOVAL

PROCEDURE


  1. REMOVE FRONT DOOR SCUFF PLATE LH (for LHD)

    Click here

  2. REMOVE FRONT DOOR SCUFF PLATE RH (for RHD)

    Click here

  3. REMOVE COWL SIDE TRIM BOARD LH (for LHD)

    Click here

  4. REMOVE COWL SIDE TRIM BOARD RH (for RHD)

    Click here

  5. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  6. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

    Note


    • Avoid physical shock to the accelerator pedal sensor assembly.

    • Do not disassemble the accelerator pedal sensor assembly.

    • The accelerator pedal sensor assembly does not require lubrication.

    • Do not apply oil or other lubricants to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.


    1. B005OV1C01
      *A for LHD
      *B for RHD

      Disconnect the accelerator pedal sensor assembly connector.

    2. Remove the 2 nuts and accelerator pedal sensor assembly.

      Note

      If the accelerator pedal sensor assembly has been struck or dropped, replace it.

    3. Separate the rod of the accelerator pedal sensor assembly from the accelerator pedal assembly to remove the accelerator pedal sensor assembly.

  7. REMOVE ACCELERATOR PEDAL PAD


    1. B005MD4C01
      *A for LHD
      *B for RHD

      Disengage the 2 claws and remove the accelerator pedal pad.

  8. REMOVE ACCELERATOR PEDAL


    1. B005N36C01
      *A for LHD
      *B for RHD

      Remove the 2 bolts and accelerator pedal.