SFI SYSTEM(w/o Canister Pump Module) PRECAUTION


  1. INITIALIZATION

    Note


    • Before replacing the ECM, refer to Service Bulletin (for Immobiliser System).

    • Perform Registration (VIN registration or frame number registration) when replacing the ECM.

      Click here

    • Make sure to perform Reset Memory (A/T initialization), when replacing the automatic transaxle assembly, ECM or engine assembly.



    • When the cable is disconnected from the negative (-) battery terminal, initialize the following system(s) after the cable is reconnected.

      System Name See Procedure
      LKA/LDA System

      Click here

      Intelligent Clearance Sonar System
      Pre-Crash Safety System
      Lighting System (EXT)
      Adaptive High Beam System
      Stop and Start System
      Parking Assist Monitor System (w/ Parallel Parking Assist Function)
      Parking Assist Monitor System (w/o Parallel Parking Assist Function)
      Panoramic View Monitor System
      Power Door Lock Control System
      Power Back Door System

  2. WHEN USING GTS

    CAUTION:

    Observe the following items for safety reasons:


    • Before using the GTS, read the instruction manual.

    • Prevent the GTS cable from being caught on the pedals, shift lever or steering wheel when driving with the GTS connected to the vehicle.

    • When driving the vehicle for testing purposes using the GTS, 2 persons are required. One to drive the vehicle, and another to operate the GTS.