ENGINE COOLANT TEMPERATURE SENSOR INSPECTION

PROCEDURE


  1. INSPECT ENGINE COOLANT TEMPERATURE SENSOR


    1. A01RC6IC07
      *a

      Component without harness connected

      (Engine Oil Temperature Sensor)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 2.32 to 2.59 kΩ
      80°C (176°F) 0.310 to 0.326 kΩ

      Note

      When checking the engine coolant temperature sensor in water, keep the terminals dry. After checking, wipe the water off the engine coolant temperature sensor.

      If the result is not as specified, replace the engine coolant temperature sensor.