ACTIVE CONTROL ENGINE MOUNT ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT FRONT ENGINE MOUNTING INSULATOR


    1. Disconnect the vacuum hose from the front engine mounting insulator assembly.

    2. A01R9EYC01
      *a Vacuum Hose

      Using a vacuum pump, apply vacuum of 80 kPa (600 mmHg, 23.6 in.Hg) and wait for 1 minute.

    3. Check that there is no change in the needle movement of the vacuum pump gauge.

      OK
      Vacuum pressure holds.

    4. Check that there is no fluid leakage caused by a break in the diaphragm.

    5. Connect the vacuum hose to the front engine mounting insulator assembly.