2GR-FKS BATTERY / CHARGING TORQUE SPECIFICATIONS

Part Tightened N*m kgf*cm ft.*lbf in.*lbf
Positive (+) battery terminal x Battery
5.4 N*m
55 kgf*cm
48 in.*lbf
Negative (-) battery terminal x Battery
5.4 N*m
55 kgf*cm
48 in.*lbf

150A Type:

Generator pulley with clutch x Generator rotor assembly

 with SST
73 N*m
744 kgf*cm
54 ft.*lbf
without SST
78.5 N*m
800 kgf*cm
58 ft.*lbf

180A Type:

Retainer plate x Generator drive end frame
3.0 N*m
31 kgf*cm
27 in.*lbf

180A Type:

Generator coil assembly x Generator drive end frame
7.5 N*m
76 kgf*cm
66 in.*lbf

180A Type:

Generator brush holder assembly x Generator coil assembly
1.8 N*m
18 kgf*cm
16 in.*lbf

180A Type:

Generator rear end cover x Generator coil assembly
4.6 N*m
47 kgf*cm
41 in.*lbf

180A Type:

Generator pulley with clutch x Generator rotor assembly

 with SST
64 N*m
653 kgf*cm
47 ft.*lbf
without SST
80 N*m
816 kgf*cm
59 ft.*lbf
Cylinder block x Generator assembly bracket
20 N*m
204 kgf*cm
15 ft.*lbf
Generator assembly x Generator assembly bracket
20 N*m
204 kgf*cm
15 ft.*lbf
Wire harness clamp bracket x Generator assembly
8.4 N*m
86 kgf*cm
74 in.*lbf
Generator assembly x Cylinder block
43 N*m
438 kgf*cm
32 ft.*lbf

150A Type:

Wire harness x Terminal B
9.8 N*m
100 kgf*cm
87 in.*lbf

180A Type:

Wire harness x Terminal B
12 N*m
122 kgf*cm
9 ft.*lbf