SUSPENSION CONTROL SERVICE DATA

Front Acceleration Sensor
Tester Connection Condition Specified Condition
for LH Side 1 (SGFL) - 2 (SGG) Sensor stationary Approx. 2.0 to 2.5 V
Sensor vibrating vertically Changes between approx. 0.9 and 3.6 V
for RH Side 1 (SGFR) - 2 (SGG) Sensor stationary Approx. 2.0 to 2.5 V
Sensor vibrating vertically Changes between approx. 0.9 and 3.6 V
Absorber Control Actuator (for Front Side)
Tester Connection Condition Specified Condition
for LH Side 1 (FAL-) - 2 (FAL+) 15 to 25°C 2.8 to 4.4 Ω
for RH Side 1 (FAR-) - 2 (FAR+)
Absorber Control Actuator (for Rear Side)
Tester Connection Condition Specified Condition
for LH Side 2 (RAL+) - 1 (RAL-) 15 to 25°C 2.8 to 4.4 Ω
for RH Side 2 (RAR+) - 1 (RAR-)
Absorber Control Switch (Combination Switch Assembly)
Tester Connection Switch Condition Specified Condition
8 (B) - 1 (GND) Normal position ON Below 10 Ω
Normal position OFF 10 kΩ or higher
7 (P) - 1 (GND) SPORT position ON Below 10 Ω
SPORT position OFF 10 kΩ or higher