8AR-FTS ENGINE CONTROL SERVICE DATA

SPARK PLUG
Standard Insulation Resistance Spark plug (terminal part) - Body ground 10 MΩ or higher
Spark Plug Type NGK made DILFR7K9G
Maximum Electrode Gap for Used Spark Plug 1.1 mm (0.0433 in.)
Standard Electrode Gap for New Spark Plug 0.8 to 0.9 mm (0.0315 to 0.0354 in.)
CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side)
Standard Stroke - 4.5 mm (0.177 in.) or more
CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side)
Standard Resistance 20°C (68°F) 6.9 to 7.9 Ω
CAMSHAFT OIL CONTROL SOLENOID
Camshaft Timing Oil Control Solenoid Assembly Plunger operate OK The plunger extends outwards 5.9 mm (0.232 in.) or more
THROTTLE BODY WITH MOTOR ASSEMBLY
Standard Throttle Valve Opening Percentage Shift lever in N 60% or higher
Standard Resistance 1 (M-) - 2 (M+) 20°C (68°F) 0.3 to 100 Ω
Manifold Thermostat Valve lift Standard 2.5 to 4.5 mm (0.0984 to 0.177 in.)
VACUUM SWITCHING VALVE (for Engine Mounting)
Standard Resistance 1 - 2 20°C (68°F) 37 to 44 Ω
1 - Body ground 10 kΩ or higher
2 - Body ground 10 kΩ or higher
ACCELERATOR PEDAL SENSOR ASSEMBLY
Standard Voltage (Accelerator Position Sensor No.1 Voltage) Accelerator pedal fully released 0.5 to 1.1 V
Accelerator pedal fully depressed 2.6 to 4.5 V
Standard Voltage (Accelerator Position Sensor No.2 Voltage) Accelerator pedal fully released 1.2 to 2.0 V
Accelerator pedal fully depressed 3.4 to 4.75 V
MASS AIR FLOW METER SUB-ASSEMBLY
Mass Air Flow Sensor

  • Engine not running

  • 30 seconds after ignition switch turned to ON

 0.57 gm/sec or less
Standard Resistance 1 (THA) - 2 (E2) -20°C (-4°F) 13.6 to 18.4 kΩ
20°C (68°F) 2.21 to 2.69 kΩ
60°C (140°F) 0.49 to 0.67 kΩ
ENGINE COOLANT TEMPERATURE SENSOR
Standard Resistance 20°C (68°F) 2.32 to 2.59 kΩ
80°C (176°F) 0.310 to 0.326 kΩ
ENGINE OIL TEMPERATURE SENSOR
Standard Resistance 30°C (86°F) 2.647 to 3.021kΩ
KNOCK CONTROL SENSOR
Standard Resistance 20°C (68°F) 120 to 280 kΩ
MANIFOLD ABSOLUTE PRESSURE SENSOR
Standard Resistance 4 (THIM) - 2 (E2) 20°C (68°F) 2.09 to 2.81 kΩ
AIR FUEL RATIO SENSOR
Standard Resistance 1 (HA1A) - 2 (+B) 20°C (68°F) 1.6 to 3.2 Ω
1 (HA1A) - 4(A1A-) Always 10 kΩ or higher
HEATED OXYGEN SENSOR
Standard Resistance 2 (HT1B) - 1 (+B) 20°C (68°F) 9 to 14 Ω
2 (HT1B) - 3 (E2) Always 10 kΩ or higher
FUEL PUMP RELAY (FUEL PMP)
Standard Resistance 3 - 5 Battery voltage not applied between terminals 1 and 2 10 kΩ or higher
Battery voltage applied between terminals 1 and 2 Below 1 Ω
INJECTOR RELAY (INJ)
Standard Resistance 3 - 5 Battery voltage not applied between terminals 1 and 2 10 kΩ or higher
Battery voltage applied between terminals 1 and 2 Below 1 Ω