8AR-FTS INTAKE / EXHAUST SERVICE DATA

COOLANT
Standard Capacity Classification
3.2 liters (3.4 US qts, 2.8 Imp. qts) Use only "TOYOTA Super Long Life Coolant", or similar high quality ethylene glycol based non-silicate, non-amine, non-nitrite, non-borate coolant with long-life hybrid organic acid technology (coolant with long-life hybrid organic acid technology is a combination of low phosphates and organic acids).
INTAKE AIR CONTROL VALVE
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 8.7 to 9.2 Ω
TURBOCHARGER
Boost pressure Standard pressure

120 kPa (1.2 kgf/cm2, 17 psi)

Turbine housing with valve sub-assembly Standard warpage 0.20 mm (0.00787 in.)
Waste gate valve Standard clearance 0.50 mm (0.0197 in.)
Turbine shaft Standard axial play 0.10 mm (0.00394 in.)
Compressor housing with bearing sub-assembly Standard protrusion amount 2.9 to 3.8 mm (0.114 to 0.150 in.)
WASTE GATE VALVE ACTUATOR
Waste gate valve actuator with bracket assembly travel Standard travel 21.9 to 24.7 mm (0.862 to 0.972 in.)
EXHAUST PIPE
Compression spring Standard length 43 mm (1.69 in.)
Minimum free length 41.5 mm (1.63 in.)
RADIATOR
Item Specified Condition
Reserve tank cap (for Intercooler)

Standard pressure

(for brand-new reserve tank cap (for Intercooler))

93 to 123 kPa (0.9 to 1.3 kgf/cm2, 13.5 to 18.0 psi)

Minimum pressure

(for used reserve tank cap (for Intercooler))

79 kPa (0.8 kgf/cm2, 11.5 psi)