FRONT SHOCK ABSORBER DISPOSAL

PROCEDURE


  1. DISPOSE OF FRONT SHOCK ABSORBER ASSEMBLY


    1. Fully extend the front shock absorber assembly.

    2. A01RDTEN02

      Using a hacksaw, make a hole in the cylinder between (A) and (B) shown in the illustration to discharge the gas inside.

      CAUTION:


      • Always use a cloth to prevent shards of metal flying about due to the release of pressurized gas.

      • Always wear safety glasses.

      A01RDJ9

      Tech Tips

      The gas is colorless, odorless and non-poisonous.