ABSORBER CONTROL ACTUATOR(for Rear Side) ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT ABSORBER CONTROL ACTUATOR


    1. A01RDPOC02
      *A for LH Side
      *B for RH Side
      *a

      Component without harness connected

      (Absorber Control Actuator)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      for LH Side
      Tester Connection Condition Specified Condition
      2 (RAL+) - 1 (RAL-) 15 to 25°C 2.8 to 4.4 Ω
      for RH Side
      Tester Connection Condition Specified Condition
      2 (RAR+) - 1 (RAR-) 15 to 25°C 2.8 to 4.4 Ω