FRONT ACCELERATION SENSOR(for RHD) INSTALLATION

PROCEDURE

1. INSTALL ACCELERATION SENSOR

   
   

   1. Install the acceleration sensor with the 2 nuts.

      Torque:

      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

      Note

      
      

      • Avoid any impact to the acceleration sensor.

      • Do not drop the acceleration sensor. If it is dropped, replace it with a new one.

   2. Connect the connector to the acceleration sensor.

2. INSTALL ECU INTEGRATION BOX LH (for LH Side)

   Click here

3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for LH Side)

   Tech Tips

   Use the same procedure as for the LHD.

   Click here

4. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL (for LH Side)

   Tech Tips

   Use the same procedure as for LHD.

   Click here

5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LH Side)

   Tech Tips

   Use the same procedure as for the LHD.

   Click here

6. INSTALL INSTRUMENT PANEL GARNISH LH (for LH Side)

   Click here

7. INSTALL COWL SIDE TRIM BOARD LH (for LH Side)

   Click here

8. INSTALL FRONT DOOR SCUFF PLATE LH (for LH Side)

   Click here

9. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RH Side)

   Click here

10. INSTALL COWL SIDE TRIM BOARD RH (for RH Side)

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

11. INSTALL FRONT DOOR SCUFF PLATE RH (for RH Side)

    Tech Tips

    Use the same procedure as for the LH side.

    Click here