ROOF DRIP SIDE FINISH MOULDING REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE CENTER ROOF DRIP SIDE FINISH MOULDING


    1. A01QC0LC02
      B002CL1 Protective Tape

      Apply protective tape around the center roof drip side finish moulding as shown in the illustration.

    2. Using a moulding remover B, disengage the roof drip side finish moulding clips to remove the center roof drip side finish moulding.

      Note


      • Do not remove the roof drip side finish moulding clip.

      • If the roof drip side finish moulding clip is damaged or falls out, replace it with a new one.

    3. Remove the protective tape.