AHS ECU INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure listed below is for LH side.

PROCEDURE


  1. PRECAUTION

    Note


    • Handle components indoors as much as possible to prevent foreign matter from entering and adhering to headlight assembly components.

    • Do not reuse parts which have reduced fastening ability due to thread damage.

    • When installing components, make sure that the wire harness is not pinched or pulled.

    • Do not use solvent to clean components. Only clean them with a dry cloth.

  2. INSTALL HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY


    1. Install a new headlight light control ECU sub-assembly gasket.

    2. Connect the 2 connectors.

    3. Install the cover.

    4. Install the headlight light control ECU sub-assembly with the 3 screws.

  3. INSTALL HEADLIGHT ASSEMBLY

    Click here

  4. ADJUST HEADLIGHT AIMING

    Click here