HEIGHT CONTROL SENSOR INSTALLATION

PROCEDURE


  1. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY


    1. B002DMGC01
      *a Clamp
      *b Guide

      Engage the guides to install the rear height control sensor sub-assembly with the 2 bolts and nut.

      Torque:
      Nut
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }
      Bolt
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

    2. Engage the clamp.

    3. Connect the connector.

  2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Click here

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. PERFORM INITIALIZATION

    Click here

  4. ADJUST HEADLIGHT AIMING

    Click here