ROCKER PANEL MOULDING INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL BODY ROCKER PANEL MOULDING ASSEMBLY


    1. Engage the clips to install the body rocker panel moulding assembly.

      A01Q9NN

    2. Install the clip.

    3. Install the 6 clips.

    4. Install the screw.

      Tech Tips

      Use the same procedure for the front side and rear side.

    5. Install the screw.

    6. Install the 2 clips and 3 screws.

    7. Remove the protective tape.

  2. INSTALL REAR ROCKER PANEL MOULDING END COVER


    1. A01QA3Z

      Engage the claws to install the rear rocker panel moulding end cover.

      Tech Tips

      Use the same procedure for the front side and rear side.

  3. INSTALL NO. 2 REAR FLOOR HOUSING SHIELD

    Click here