ROCKER PANEL MOULDING REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE NO. 2 REAR FLOOR HOUSING SHIELD

    Click here

  2. REMOVE REAR ROCKER PANEL MOULDING END COVER


    1. A01Q8F5C01
      *a Protective Tape

      Using a screwdriver with its tip wrapped in protective tape, disengage the claws to remove the rear rocker panel moulding end cover.

      Tech Tips

      Use the same procedure for the front side and rear side.

  3. REMOVE BODY ROCKER PANEL MOULDING ASSEMBLY


    1. Apply protective tape around the body rocker panel moulding assembly and door as shown in the illustration.

      A01QBFGC01
      B002CL1 Protective Tape - -
    2. A01Q8ZZ

      Remove the 3 screws.

    3. Remove the 2 clips.

    4. A01Q9OK

      Remove the screw.

    5. A01QC14

      Remove the screw.

      Tech Tips

      Use the same procedure for the front side and rear side.

    6. Remove the 6 clips.

      A01Q9KP

    7. Remove the clip.

    8. Disengage the clips to remove the body rocker panel moulding assembly.

      A01Q9NN