REAR DOOR BELT MOULDING INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click here

  2. INSTALL REAR DOOR BELT MOULDING


    1. B002CECC01
      B002C8N Install in this Direction

      Engage the claws to install the front door belt moulding.

  3. INSTALL REAR DOOR GLASS SUB-ASSEMBLY

    Click here

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Click here

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  5. INITIALIZE POWER WINDOW CONTROL SYSTEM

    Click here

  6. INSPECT POWER WINDOW OPERATION

    Click here