LICENSE PLATE LIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure listed below is for LH side.

PROCEDURE


  1. INSTALL LICENSE PLATE LIGHT ASSEMBLY


    1. B002EY8C01
      B002C8N Install in this Direction

      Engage the claws to install the license plate light assembly as shown in the illustration.

    2. Connect the connector.

  2. INSTALL NO. 3 LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH


    1. B002CMBC01
      B002C8N Install in this Direction

      Engage the claws to install the No. 3 luggage compartment door outside garnish as shown in the illustration.

    2. Remove the protective tape.

  3. INSTALL LUGGAGE COMPARTMENT DOOR COVER

    Click here

  4. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP

    Click here

  5. INSTALL SWITCH BEZEL (w/ Power Trunk Lid System)

    Click here

  6. INSTALL LUGGAGE COMPARTMENT DOOR INSIDE HANDLE (w/ Handle)

    Click here

  7. INSTALL LUGGAGE LOCK CONTROL CABLE PLATE (w/ Handle)

    Click here