LICENSE PLATE LIGHT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure listed below is for LH side.

PROCEDURE


  1. REMOVE LUGGAGE LOCK CONTROL CABLE PLATE (w/ Handle)

    Click here

  2. REMOVE LUGGAGE COMPARTMENT DOOR INSIDE HANDLE (w/ Handle)

    Click here

  3. REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP

    Click here

  4. REMOVE SWITCH BEZEL (w/ Power Trunk Lid System)

    Click here

  5. REMOVE LUGGAGE COMPARTMENT DOOR COVER

    Click here

  6. REMOVE NO. 3 LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH


    1. B002EPNC01
      B002CL1 Protective Tape

      Apply protective tape around the No. 3 luggage compartment door outside garnish.

    2. B002E84C01
      *a Protective Tape
      B002C8N Remove in this Direction

      Using a screwdriver with its tip wrapped in protective tape, disengage the claws to remove the No. 3 luggage compartment door outside garnish as shown in the illustration.

  7. REMOVE LICENSE PLATE LIGHT ASSEMBLY


    1. B002CFWC01
      B002C8N Remove in this Direction

      Disconnect the connector.

    2. Disengage the claws to remove the license plate light assembly as shown in the illustration.