REAR LIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure listed below is for LH side.

PROCEDURE


  1. INSTALL REAR LIGHT ASSEMBLY


    1. Install the rear light assembly with the 4 nuts.

      Torque:
      4.5 N*m  { 46 kgf*cm, 40 in.*lbf }

    2. Connect the connector.

  2. INSTALL LUGGAGE COMPARTMENT DOOR COVER

    Click here

  3. INSTALL SWITCH BEZEL (w/ Power Trunk Lid System)

    Click here

  4. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP

    Click here

  5. INSTALL LUGGAGE COMPARTMENT DOOR INSIDE HANDLE (w/ Handle)

    Click here

  6. INSTALL LUGGAGE LOCK CONTROL CABLE PLATE (w/ Handle)

    Click here