| DTC Code | DTC Name |
|---|---|
| B2414 | Steering Position Sensor Malfunction |
DESCRIPTION
The headlight control computer assembly LH receives signals indicating direction and amount the steering is turned from the steering sensor using CAN communication.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| B2414 | Steering Position Sensor Malfunction | Malfunction in steering sensor |
|
WIRING DIAGRAM
| *1 | Spiral Cable with Sensor Sub-assembly (Steering Sensor) |
| *2 | headlight control computer assembly LH |
| *3 | CAN Communication Line |
CAUTION / NOTICE / HINT
Note
Perform the communication function inspections in Diagnosis System to confirm that there are no CAN communication malfunctions before performing the following procedure.
for LHD:
for RHD:
If the headlight control computer assembly LH has been replaced, it is necessary to synchronize the vehicle information and initialize the headlight control computer assembly LH.
PROCEDURE
CLEAR DTC
Clear the DTCs.
| Result | ||
|---|---|---|
|
| NEXT |
|
CHECK FOR SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY (STEERING SENSOR)
Check for DTCs.
| OK |
|---|
| DTC B2414 is not output. |
| Result | |||
|---|---|---|---|
|
| OK |
|
USE SIMULATION METHOD TO CHECK Click here |
| NG |
|
REPLACE SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY (STEERING SENSOR)
Replace the spiral cable with sensor sub-assembly (steering sensor) with a new or known good one.
Check for DTCs.
| OK |
|---|
| DTC B2414 is not output. |
| Result | |||
|---|---|---|---|
|
| OK |
|
END (SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY (STEERING SENSOR) WAS DEFECTIVE) |
| NG |
|
REPLACE HEADLIGHT CONTROL COMPUTER ASSEMBLY LH Click here |