LIGHTING SYSTEM SYSTEM DESCRIPTION


  1. AUTOMATIC LIGHT CONTROL SYSTEM

    When the headlight dimmer switch is in the AUTO position, the automatic light control system detects ambient light levels and controls the headlights, fog lights, taillights, clearance lights and license plate lights.

  2. LIGHT AUTO TURN-OFF SYSTEM (w/ Light Auto Turn-off Delay Function)

    The light auto turn-off system is used to prevent the exterior lights from being accidentally left on (headlights, taillights, clearance lights, license plate lights).

    This system has the following functions.

    Function Outline
    Delay Function

    The exterior lights automatically turn off after 30 seconds when all of the following conditions are met:


    • The low beam headlights are on (headlight dimmer switch is in the AUTO position).

    • The engine switch is turned from on (IG) to off.

    • All doors (including luggage compartment door) are closed after driver door is opened.

  3. LIGHT AUTO TURN-OFF SYSTEM (w/ Follow Me Home System)

    The light auto turn-off system is used to prevent the driver from leaving the vehicle with the headlights, rear fog lights*1, clearance lights, taillights or license plate lights on.

    Switch Condition Outline
    Light control switch in AUTO position While the lights (headlights, rear fog lights*1, clearance lights, taillights or license plate lights) are turned on, this control automatically turns them off when the engine switch is turned from on (IG) to off.
    Light control switch in tail or head position While the lights (headlights, rear fog lights*1, clearance lights, taillights or license plate lights) are turned on, this control automatically turns off only headlights and the when the engine switch is turned from on (IG) to off.

    • *1: w/ Rear Fog Light

  4. LIGHT AUTO TURN-OFF SYSTEM (w/o Light Auto Turn-off Delay Function, w/o Follow Me Home System)

    The light auto turn-off system is used to prevent the driver from leaving the vehicle with the headlights, rear fog lights*1, clearance lights, taillights or license plate lights on. When all of the following conditions are met, the exterior lights turn off:


    • The engine switch is turned from on (IG) to off.

    • The headlights, rear fog lights*1, clearance lights, taillights, or license plate lights are on.

    • The driver door is opened.


    • *1: w/ Rear Fog Light

  5. FOLLOW ME HOME SYSTEM (w/ Follow Me Home System)


    1. The follow me home system is designed to illuminate the low beam headlights, clearance lights, taillights or license plate lights and for certain period after the vehicle is parked.


      1. This system is controlled by the main body ECU (multiplex network body ECU).

      2. This system is enabled when the following conditions are met:


        • The engine switch is off.

        • The headlight dimmer switch is in the off or AUTO position.

        • The headlight dimmer switch is pulled to flash headlights once.

  6. DAYTIME RUNNING LIGHT SYSTEM


    1. The daytime running light system is designed to automatically illuminate the headlights (high-intensity parking lights), during the daytime to make the car more visible to other vehicles.


      • The main body ECU controls this system.

      • This system is enabled when the conditions below are met:


        • The engine switch is on (IG).

        • An engine speed signal is input (the engine is running).

        • Parking brake is released.

        • Headlight dimmer switch is in the off (w/o DRL OFF switch), tail or AUTO position (and the low beam headlights are not turned on via the automatic light control system).

  7. LANE CHANGE FLASHER AND TURN CANCEL FUNCTION


    1. General


      • The lane change flasher function flashes the turn signal lights the customized number of times when the headlight dimmer switch is moved to the lane change position, and then automatically turns off the lights.

      • After the headlight dimmer switch has been moved to the turn position, the turn cancel function turns off the turn signal lights when the headlight dimmer switch is moved to the lane change position corresponding to the turn direction (The "same-direction cancel function", which can cancel a turn signal when the headlight dimmer switch is moved in the same direction, can be selected using the customize function).

        A01Q8EQC01
        *A for LHD *B for RHD
        *C for Light Control Switch LH Side Type *D for Light Control Switch RH Side Type
        *1 Right Turn *2 Right Lane Change
        *3 NEUTRAL *4 Left Lane Change
        *5 Left Turn - -