RAIN SENSOR REMOVAL

PROCEDURE


  1. REMOVE RAIN SENSOR COVER


    1. A01QC57

      Disengage the claws to remove the rain sensor cover.

  2. REMOVE RAIN SENSOR


    1. A01QBQS

      Disconnect the connector.

    2. A01Q8O2C01
      B002DP3 Release Direction
      B002C8N Remove in this Direction

      Release the stopper by pulling it out and remove the rain sensor as shown in the illustration.

      Tech Tips

      The rain sensor tape is reusable. Only replace the tape if it is damaged or contaminated with foreign matter.

  3. CLEAN WINDSHIELD GLASS

    Tech Tips


    • The rain sensor tape is reusable. Only replace the tape if it is damaged or contaminated with foreign matter.

    • Check that there is no rain sensor tape residue remaining on the windshield glass. If there is, remove the residue before installing the rain sensor.

    • If there is any rain sensor tape residue remaining on the windshield glass, replace the tape.