AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL SYSTEM FREEZE FRAME DATA


  1. FREEZE FRAME DATA


    1. Whenever an automatic headlight beam level control system DTC is stored, the headlight control computer assembly LH stores the current vehicle state as freeze frame data.

  2. CHECK FREEZE FRAME DATA


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / AFS / Trouble Codes.

    5. Select a DTC to display its freeze frame data.


      Body Electrical > AFS
      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      Traveling Direction Traveling direction Not Fwd: Shift lever in R or N

      Not Fwd: Shift lever in R or N

      Fwd: Shift lever not in R or N

      		 -
      Headlight Low Beam State Low beam headlight state ON or OFF

      ON: Low beam headlights on

      OFF: Low beam headlights off

      		 -
      Headlight High Beam State High beam headlight state ON or OFF

      ON: Low beam headlights on

      OFF: Low beam headlights off

      		 -
      DRL State Daytime running light state ON or OFF

      ON: Daytime running lights on

      OFF: Daytime running lights off

      		 -
      Clearance Light State Clearance light state ON or OFF

      ON: Clearance lights on

      OFF: Clearance lights off

      		 -
      Right Cornering Light State Cornering light RH state ON or OFF

      ON: Cornering light RH on

      OFF: Cornering light RH off

      		 Not Supported
      Left Cornering Light State Cornering light LH state ON or OFF

      ON: Cornering light LH on

      OFF: Cornering light LH off

      		 Not Supported
      Engine Engine condition Run or Stop

      Run: Engine is running

      Stop: Engine is stopped

      		 -
      Passing Light Switch Dimmer switch high flash position (pass) signal ON or OFF

      ON: Dimmer switch in high flash position

      OFF: Dimmer switch not in high flash position

      		 -
      Steering Sens Signal Steering sensor signal value -384.0 deg to 382.5 deg 0.0 deg -
      FR Wheel Speed Front right wheel speed 0.00 to 327.67 km/h(203.60 mph) Vehicle stopped: 0 km/h (0 mph) -
      FL Wheel Speed Front left wheel speed 0.00 to 327.67 km/h(203.60 mph) Vehicle stopped: 0 km/h (0 mph) -
      Vehicle Acceleration Vehicle acceleration -455.64 to 445.60 m/s2 Vehicle stopped: 0.0 m/s2 -
      Leveling Motor Slave Status of the headlight leveling motor slave Normal or Abnormal

      Normal: Headlight leveling motor is normal

      Abnormal: Headlight leveling motor is not normal

      		 If operation is abnormal, there may be a LIN communication error
      Leveling Motor Over-Run Status of the headlight leveling motor over-run Normal or Abnormal

      Normal: Headlight leveling motor is normal

      Abnormal: Headlight leveling motor is not normal

      		 If operation is abnormal, there may be a LIN communication error
      +B Headlight control computer assembly LH IG power supply voltage value 0 to 19.75 V 11.00 to 14.00 V -
      +B Voltage Value Headlight control computer assembly LH +B power supply voltage value 0 to 19.75 V 11.00 to 14.00 V -
      Number Of Trouble Codes Number of stored DTCs when Freeze Frame Data stored 0 to 255 0 to 255 -

  3. CLEAR FREEZE FRAME DATA

    Note

    Clearing the DTCs will also clear the freeze frame data.


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Clear the DTCs and freeze frame data.

      Click here


      Body Electrical > AFS > Clear DTCs