WASHER NOZZLE REMOVAL

PROCEDURE


  1. REMOVE WASHER NOZZLE SUB-ASSEMBLY


    1. A01Q9HOC01
      *a Protective Tape
      B002C8N Remove in this Direction (1)
      B002E01 Remove in this Direction (2)

      Using a screwdriver with its tip wrapped in protective tape, disengage the claws to separate the washer nozzle subassembly as shown in the illustration.

      Note

      Be careful not to damage the windshield glass.

      Tech Tips

      Use the same procedure as for the opposite side.

    2. A01Q9U3

      Disconnect the washer hose to remove the washer nozzle sub-assembly.

      Note

      Washer nozzle sub-assembly cannot be reused.