WASHER NOZZLE ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT WASHER NOZZLE SUB-ASSEMBLY


    1. Operate the washer nozzle sub-assembly and check the position that the washer fluid hits the windshield.

      Standard
      Washer fluid hits the windshield in the areas shown in the illustration.
      A01QCWGC01
      *a Upper Limit *b Standard
      *c Lower Limit - -
      Standard Clearance
      Area Measurement Area Measurement
      A 120 mm (4.72 in.) B 405 mm (15.9 in.)
      C 75 mm (2.95 in.) D 260 mm (10.2 in.)

      Tech Tips

      If the result is not as specified, replace the washer nozzle sub-assembly.