WASHER MOTOR INSTALLATION

PROCEDURE


  1. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. A01QBX8C01
      B002C8N Install in this Direction

      Install the windshield washer motor and pump assembly as shown in the illustration.

    2. Connect the connector.

    3. A01QBWL

      Connect the washer hose.

  2. ADD WINDSHIELD WASHER FLUID


    1. Add windshield washer fluid to the washer jar.

  3. INSTALL FRONT FENDER LINER LH


    1. Install the front fender liner LH with the 11 clips.

    2. Install the 2 bolts and 15 screws.

    3. A01QB7XC01
      *a Correct
      *b Incorrect

      Install the pin hold clip as shown in the illustration.

      Note

      Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is aligned vertically.

  4. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH


    1. Install the front wheel opening extension pad LH with the 3 screws.

  5. INSTALL WHEEL ASSEMBLY

    Click here