FRONT WIPER MOTOR INSPECTION

PROCEDURE

1. INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY

   

   *a	Component without harness connected (Windshield Wiper Motor Assembly)

   
   

   1. Check the LO operation.

      
      

      1. Connect a positive (+) lead from the battery to terminal 5 (+1) and a negative (-) lead to terminal 4 (E), and check that the motor operates at low speed.

         OK
         Motor operates at low speed (LO).

         If the result is not as specified, replace the windshield wiper motor assembly.

   2. Check the HI operation.

      
      

      1. Connect a positive (+) lead from the battery to terminal 3 (+2) and a negative (-) lead to terminal 4 (E), and check that the motor operates at high speed.

         OK
         Motor operates at high speed (HI).

         If the result is not as specified, replace the windshield wiper motor assembly.