LUGGAGE COMPARTMENT DOOR OPENER OUTER SWITCH INSPECTION

PROCEDURE


  1. INSPECT LUGGAGE ELECTRICAL KEY SWITCH


    1. Check the resistance.


      1. A01QD6RC08
        *a

        Component without harness connected

        (Luggage Electrical Key Switch)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 (E) - 2 (UL) Switch off 10 kΩ or higher
        Switch on Below 1 Ω

        If the result is not as specified, replace the luggage electrical key switch.