LUGGAGE COMPARTMENT DOOR INSPECTION

PROCEDURE


  1. INSPECT DOOR UNLOCK SWITCH SUB-ASSEMBLY


    1. B002EC7C02
      *a Door unlock switch sub-assembly in neutral position
      *b Door unlock switch sub-assembly in unlock position
      *c 60°
      *d

      Component without harness connected

      (Door Unlock Switch Sub-assembly)

      Check the resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 Door unlock switch sub-assembly in neutral position 10 kΩ or higher
        Door unlock switch sub-assembly in unlock position Below 1 Ω

        If the result is not as specified, replace the door unlock switch sub-assembly.