REAR DOOR OPENING TRIM WEATHERSTRIP INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for both the LH and RH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP


    1. B002EEMC01
      *a Paint Mark
      *b Mark Position

      Align the point mark on the rear door opening trim weatherstrip with the mark position on the vehicle to install a new rear door opening trim weatherstrip as shown in the illustration.

      Paint Mark
      Location Color
      RH Side Pink
      LH Side Purple

      Note


      • Always align the paint mark when installing the port. If the paint mark position is out of place, coolant leaks may occur.

      • After installation, check that the correctly.

      Tech Tips

      To easily install the rear door opening trim weatherstrip, first install the area with the paint mark as shown in the illustration. Then install the part to ward the corners and push any excess length into the corners.

  2. INSTALL ROOF HEADLINING

    Click here