LUGGAGE COMPARTMENT DOOR CLOSER SYSTEM OPERATION CHECK


  1. CHECK BASIC FUNCTIONS

    Note

    This check is possible only when the "PBD Power Operation"*1 or "Closer Power Operation"*2 customization setting using the GTS is set to ON (initial setting is ON).

    Click here


    • *1: w/ Power Trunk Lid System

    • *2: w/o Power Trunk Lid System


    1. Inspect the closer operation.


      1. Open the luggage compartment door.

      2. Partially close the luggage compartment door, and check that the closer motor of the luggage door closer assembly operates and that the luggage compartment door fully closes.

    2. Inspect the luggage electrical key switch.


      1. Open the luggage compartment door.

      2. Partially close the luggage compartment door to cause the closer motor of the luggage door closer assembly to operate.

      3. Push the luggage electrical key switch during the closer operation, and check that the closer operation stops, the closer motor performs the release operation, and the luggage compartment door does not close.

    3. Inspect the luggage compartment door lock cylinder.


      1. Open the luggage compartment door.

      2. Insert the key into the luggage compartment door lock cylinder.

      3. Partially close the luggage compartment door to cause the closer motor of the luggage door closer assembly to operate.

      4. Operate the luggage compartment door lock cylinder during the closer operation, and check that the closer operation stops, the closer motor performs the release operation, and the luggage compartment door does not close.