DATA LIST
Note
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Tech Tips
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / (desired system) / Data List.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Half Latch SW | Luggage door closer assembly half-latch switch signal | ON or OFF | ON: Half-latch switch of luggage door closer assembly on (Luggage compartment door open) OFF: Half-latch switch of luggage door closer assembly off (Luggage compartment door closed) |
When this item is abnormal, there is a problem with the half-latch switch of the luggage door closer assembly or related parts.* |
| Pawl Position Switch | Luggage door closer assembly pawl switch signal | ON or OFF | ON: Pawl switch of luggage door closer assembly on OFF: Pawl switch of luggage door closer assembly off (Luggage compartment door closed) |
When this item is abnormal, there is a problem with the pawl switch of the luggage door closer assembly or related parts.* |
| PBD Close SW | Door control switch signal | ON or OFF | ON: Door control switch is on OFF: Door control switch is off |
When this item is abnormal, there is a problem with the door control switch or related parts. |
| IG SW | Engine switch signal | ON or OFF | ON: Engine switch on (IG) OFF: Engine switch off |
"OFF" is also displayed for this item when the engine switch is on (ACC). |
| PBD Position (3/4-Open) | Luggage compartment door position (3/4 open - Full open) | Caution or OK | Caution: Luggage compartment door position is not 3/4 opened - fully opened OK: Luggage compartment door position is 3/4 opened - fully opened |
- |
| PBD Position (2/4-3/4) | Luggage compartment door position (Full close - 3/4 open) | Caution or OK | Caution: Luggage compartment door position is not 2/4 opened - 3/4 opened OK: Luggage compartment door position is 2/4 opened - 3/4 opened |
- |
| PBD Position (1/4-2/4) | Luggage compartment door position (Full close - 2/4 open) | Caution or OK | Caution: Luggage compartment door position is not 1/4 opened - 2/4 opened OK: Luggage compartment door position is 1/4 opened - 2/4 opened |
- |
| PBD Position (Close-1/4) | Luggage compartment door position (Full close - 1/4 open) | Caution or OK | Caution: Luggage compartment door position is not fully closed - 1/4 opened OK: Luggage compartment door position is fully closed - 1/4 opened |
- |
| Closed Position Initialization | Status of luggage compartment door fully closed position | Initialized or Not initialized | Initialized: Fully closed position of luggage compartment door is memorized (initialized) Not initialized: Fully closed position of luggage compartment door is not memorized (not initialized) |
When "Not initialized is displayed for this item, power trunk lid system is not operated. |
| PBD Power Operation | Turns power trunk opener and closer function | OFF, ON (Close Only) or ON | Current customize setting displayed | - |
| #Codes | Number of DTCs | Min.: 0, Max.: 255 | When system is normal: 0 When a malfunction is detected: More than 0 |
- |
*: Refer to "POWER TRUNK LID OPERATION TIMING CHART"
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Trunk Lock Position | Luggage compartment door lock signal | Lock or Unlock | Lock: Luggage compartment door lock assembly locked Unlock: Luggage compartment door lock assembly unlocked |
- |
| Trunk Lock/Unlock SW | Door unlock switch signal | ON or OFF | ON: Luggage compartment door lock cylinder in unlock position OFF: Luggage compartment door lock cylinder in neutral position |
When this item is abnormal, there is a problem with the door unlock switch sub-assembly or related parts. |
| Trunk/BDoor Open SW | Luggage compartment door opening switch assembly signal | ON or OFF | ON: Luggage compartment door opening switch assembly is on OFF: Luggage compartment door opening switch assembly is off |
When this item is abnormal, there is a problem with the luggage compartment door opening switch assembly or related parts. |
| Trunk Main SW | Luggage door opening cancel switch assembly signal | ON or OFF | ON: Luggage door opening cancel switch assembly is on OFF: Luggage door opening cancel switch assembly is off |
When this item is abnormal, there is a problem with the luggage door opening cancel switch assembly or related parts. |
| Luggage Courtesy SW | Luggage door closer courtesy switch signal | ON or OFF | ON: Luggage compartment door lock cylinder on (Luggage compartment door opened) OFF: Luggage compartment door lock cylinder off (Luggage compartment door closed) |
This item is not related luggage compartment door condition. |
| Trunk Link with Door Lock | Luggage compartment door lock function | ON or OFF | Customized value displayed | - |
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Tr/B-Door Unlock SW | Luggage electrical key switch assembly (open switch) signal | ON or OFF | ON: Luggage electrical key switch (open switch) on OFF: Luggage electrical key switch assembly (open switch) off |
When this item is abnormal, there is a problem with the luggage electrical key switch of the luggage door closer assembly or related parts. |
ACTIVE TEST
Tech Tips
Using the GTS to perform the Active Tests allows relays, VSVs and actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Back Door / Active Test.
Perform the Active Test according to the display on the GTS.
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Latch Release | Latch release operation | ON or OFF | - |
| PBD Motor | luggage closer motor operation | OFF, Forward or Reverse | - |
| PBD Clutch | Clutch operation | ON or OFF | - |
| PBD Buzzer | luggage compartment door warning buzzer sound | ON or OFF | - |
| PBD Close SW Light | Operate luggage compartment door closer switch light | ON or OFF | - |