COMBINATION SWITCH(for Instrument Panel Side) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure as for the LHD and RHD vehicles.

  • The procedure listed below is for the LHD vehicles.

PROCEDURE


  1. REMOVE INSTRUMENT CENTER CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  2. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  3. REMOVE FRONT DOOR SCUFF PLATE LH

    Click here

  4. REMOVE FRONT DOOR OPENING TRIM COVER LH

    Click here

  5. REMOVE INSTRUMENT SIDE PANEL LH

    Click here

  6. REMOVE NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

    Click here

  7. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  8. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  9. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY


    1. B002CUGC01
      B002C8N Remove in this Direction

      Disengage the claws to remove the integration control and panel assembly as shown in the illustration.