COMBINATION SWITCH(for Center Console Side) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure as for the LHD and RHD vehicles.

  • The procedure listed below is for the LHD vehicles.

PROCEDURE


  1. INSTALL COMBINATION SWITCH ASSEMBLY


    1. A01QA93

      Engage the guides and claw to install the combination switch assembly.

    2. Install the 3 screws.

    3. A01Q9JRC01
      *a Clamp
      *b Guide

      Engage the guide and clamp to connect the wire harness.

  2. INSTALL CONSOLE UPPER PANEL SUB-ASSEMBLY

    Click here

  3. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  4. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  5. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

    Click here

  6. INSTALL INSTRUMENT CENTER CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here