REAR AIR CONDITIONING PANEL REASSEMBLY

PROCEDURE


  1. INSTALL COOLER CONTROL SWITCH KNOB


    1. B002D5JC01
      B002C8N Install in this direction

      Push in the direction indicated by the arrows in the illustration to install the rubber switch to the cooler control switch knob.

    2. B002D8U

      Install the 3 screws and circuit board sub-assembly.

      Note


      • When replacing the cooler control switch knob, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the circuit board sub-assembly from being damaged.

      • Do not damage the circuit board sub-assembly.

    3. B002CI2C01
      B002C8N Install in this direction

      Push in the direction indicated by the arrows in the illustration to install the cooler control switch knob to the cooler control case.

      Note


      • When replacing the cooler control switch knob, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the circuit board sub-assembly from being damaged.

      • Do not damage the circuit board sub-assembly.

  2. INSTALL COOLER CONTROL SWITCH PANEL


    1. B002EGM

      Engage the claws to install the cooler control switch panel.

    2. B002DY1

      Install the 3 screws.