REAR AIR CONDITIONING PANEL DISASSEMBLY

PROCEDURE


  1. REMOVE COOLER CONTROL SWITCH PANEL

    Note


    • Prevention of static electricity is required during this procedure.

    • Use static electricity countermeasures SST (desktop anti-static mat set) and observe all precautions to prevent damage to the system by electrostatic discharge (ESD).

    SST
    09890-47010   ( 09891-04020, 09891-04010, 09891-04030, 09891-04040 )

    1. B002DY1

      Remove the 3 screws.

    2. B002CDIC01
      *a Protective Tape

      Using a screwdriver with its tip wrapped in protective tape, disengage the claws to remove the cooler control switch panel.

  2. REMOVE COOLER CONTROL SWITCH KNOB

    Note


    • Prevention of static electricity is required during this procedure.

    • Use static electricity countermeasures SST (desktop anti-static mat set) and observe all precautions to prevent damage to the system by electrostatic discharge (ESD).

    SST
    09890-47010   ( 09891-04020, 09891-04010, 09891-04030, 09891-04040 )

    1. B002CQRC01
      B002C8N Remove in this direction

      Pull in the direction indicated by the arrows in the illustration to remove the cooler control switch knob from the cooler control case.

      Note


      • When replacing the cooler control switch knob, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the circuit board sub-assembly from being damaged.

      • Do not damage the circuit board sub-assembly.

    2. B002D8U

      Remove the 3 screws and circuit board sub-assembly.

      Note


      • When replacing the cooler control switch knob, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the circuit board sub-assembly from being damaged.

      • Do not damage the circuit board sub-assembly.

    3. B002D9KC01
      B002C8N Remove in this direction

      Pull in the direction indicated by the arrows in the illustration to remove the rubber switch from the cooler control switch knob.