CONDENSER REASSEMBLY

PROCEDURE

1. INSTALL COOLER DRYER

   
   

   1. 

      Using needle-nose pliers, install a new cooler dryer to the modulator.

   2. 

      Sufficiently apply compressor oil to new O-ring and fitting surfaces of a new cap.

      Compressor Oil
      for HFC-134a (R134a)
      ND-OIL 8 or equivalent
      for HFO-1234yf (R1234yf)
      ND-OIL 12 or equivalent

      Note

      
      

      • Keep the O-ring and O-ring fitting surfaces free from dirt or foreign matter.

      • Do not use any compressor oil other than ND-OIL 8 or equivalent.

   3. 

      *a

      Modulator

      Using a 14 mm straight hexagon socket wrench, install the cap to the modulator.

      Torque:

      2.9 N*m  { 30 kgf*cm, 26 in.*lbf }