CONDENSER REMOVAL

PROCEDURE


  1. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  2. REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  3. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  4. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE

    Click here

  5. REMOVE INLET NO. 1 AIR CLEANER

    Click here

  6. REMOVE HOOD LOCK RELEASE LEVER PROTECTOR

    Click here

  7. DISCONNECT HOOD LOCK CONTROL CABLE ASSEMBLY

    Click here

  8. REMOVE HOOD LOCK ASSEMBLY

    Click here

  9. DISCONNECT ENGINE ROOM MAIN WIRE

    Click here

  10. REMOVE UPPER RADIATOR SUPPORT

    Click here

  11. DISCONNECT LIQUID PIPE SUB-ASSEMBLY


    1. A01QB2C

      Remove the bolt.

    2. A01QBWJ

      Remove the bolt and disconnect the liquid pipe sub-assembly from the cooler condenser assembly.

    3. Remove the O-ring from the liquid pipe sub-assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  12. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE


    1. A01Q8S5

      Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the cooler condenser assembly.

    2. Remove the O-ring from the No. 1 cooler refrigerant discharge hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  13. REMOVE COOLER CONDENSER ASSEMBLY


    1. A01QAHMC01
      B002C8N Remove in this Direction

      Disengage the claws.

    2. Disengage the guides to remove the cooler condenser assembly as shown in the illustration.