FRONT BLOWER MOTOR INSTALLATION

PROCEDURE

1. INSTALL BLOWER MOTOR WITH FAN SUB-ASSEMBLY

   
   

   1. When reusing the blower motor with fan sub-assembly:

      
      

      1. Install a new heater packing to the blower motor with fan sub-assembly.

         Tech Tips

         For details, refer to the instruction manual provided with the part.

   2. Install the blower motor with fan sub-assembly with the 3 screws.

      Note

      Do not install the blower motor with fan sub-assembly if it has been dropped or subjected to a severe impact.

   3. Connect the connector.

2. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

3. INSTALL INSTRUMENT SIDE PANEL RH

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

4. INSTALL FRONT DOOR OPENING TRIM COVER RH

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

5. INSTALL FRONT DOOR SCUFF PLATE RH

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

6. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

7. INSTALL INSTRUMENT CENTER CLUSTER FINISH SUB-ASSEMBLY

   Click here