REAR SEAT CUSHION HEATER INSTALLATION

PROCEDURE


  1. INSTALL REAR SEAT CUSHION HEATER (BENCH TYPE REAR SEAT CUSHION COVER)


    1. Temporarily install the rear seat cushion heater (bench type rear seat cushion cover) to the rear seat cushion pad.

    2. Using hog ring pliers, securely install 16 new hog rings in the order shown in the illustration.

      A01QCIBE01

      Note


      • Be careful not to damage or contaminate the rear seat cushion heater (bench type rear seat cushion cover).

      • B002EVUC29
        *1 Hog Ring
        *a Hog Ring Pliers

        Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the rear seat cushion heater (bench type rear seat cushion cover).

    3. A01QAHZ

      Pass the rear seat cushion pad through the holes in the rear seat cushion heater (bench type rear seat cushion cover) as shown in the illustration.

    4. Pass the rear seat cushion heater (bench type rear seat cushion cover) through the holes in the rear seat cushion pad as shown in the illustration.

    5. A01QAER

      Pass the rear seat cushion heater wire harnesses through the holes in the rear seat cushion heater (bench type rear seat cushion cover) as shown in the illustration.

    6. Using hog ring pliers, securely install the rear seat cushion heater (bench type rear seat cushion cover) to the rear seat cushion pad with 45 new hog rings in the order shown in the illustration.

      A01Q9R7E01

      Note


      • Be careful not to damage or contaminate the rear seat cushion heater (bench type rear seat cushion cover).

      • B002EVUC29
        *1 Hog Ring
        *a Hog Ring Pliers

        Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the rear seat cushion heater (bench type rear seat cushion cover).

  2. INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY

    Click here