REAR SEATBACK HEATER INSPECTION

PROCEDURE


  1. INSPECT REAR SEATBACK HEATER (BENCH TYPE REAR SEATBACK COVER)


    1. for LH Side:


      1. A01Q8VIC03
        *a

        Component without harness connected

        (Rear Seatback Heater (Bench Type Rear Seatback Cover))

        Check the resistance.

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        A-1 - B-1 (B) Always Below 1 Ω
        A-2 - B-4 (SHDE)
        A-3 - B-2 (AL)
        A-5 - B-3 (GND)
        A-3 - A-5 Seatback heater temperature 17 to 23°C (63 to 73°F) 5.45 to 6.66 Ω
        A-3 - B-3 (GND)
        A-5 - B-2(AL)
        B-2 (AL) - B-3 (GND)

        If the result is not as specified, replace the rear seatback heater (bench type rear seatback cover).

    2. for RH Side:


      1. A01Q8VIC04
        *a

        Component without harness connected

        (Rear Seatback Heater (Bench Type Rear Seatback Cover))

        Check the resistance.

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        A-1 - B-1 (B) Always Below 1 Ω
        A-2 - B-4 (SHPE)
        A-3 - B-2 (AR)
        A-5 - B-3 (GND)
        A-3 - A-5 Seatback heater temperature 17 to 23°C (63 to 73°F) 5.45 to 6.66 Ω
        A-3 - B-3 (GND)
        A-5 - B-2(AR)
        B-2 (AR) - B-3 (GND)

        If the result is not as specified, replace the rear seatback heater (bench type rear seatback cover).