REAR SEATBACK HEATER INSTALLATION

PROCEDURE


  1. INSTALL REAR SEATBACK HEATER (BENCH TYPE REAR SEATBACK COVER)


    1. Temporarily install the rear seatback heater (bench type rear seatback cover) to the rear seatback pad.

    2. Using hog ring pliers, securely install 36 new hog rings in the order shown in the illustration.

      A01QCSCE01

      Note


      • Be careful not to damage or contaminate the rear seat rear seatback heater (bench type rear seatback cover).

      • B002EVUC29
        *1 Hog Ring
        *a Hog Ring Pliers

        Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the rear seatback heater (bench type rear seatback cover).

    3. A01Q9FV

      Pass the brackets of the rear seatback heater (bench type rear seatback cover) through the holes in the rear seatback pad as shown in the illustration.

    4. Install the rear seat airbag assembly LH.

      Click here

    5. Install the rear seat airbag assembly RH.

      Tech Tips

      Use the same procedure described for the LH side.

    6. A01QD9U

      Pass the rear seatback heater wire harnesses through the holes in the rear seatback heater (bench type rear seatback cover) as shown in the illustration.

    7. Pass the rear seatback pad through the holes in the rear seatback heater (bench type rear seatback cover) to install the rear seatback heater (bench type rear seatback cover) as shown in the illustration.

      A01QCGGE01

    8. Using hog ring pliers, securely install the rear seatback heater (bench type rear seatback cover) to the rear seatback pad with 36 new hog rings in the order shown in the illustration.

      Note


      • Be careful not to damage or contaminate the rear seatback heater (bench type rear seatback cover).

      • B002EVUC29
        *1 Hog Ring
        *a Hog Ring Pliers

        Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the rear seatback heater (bench type rear seatback cover).

  2. INSTALL REAR SEAT HEADREST SUPPORT

    Click here

  3. INSTALL REAR SEAT CENTER SHOULDER BELT GUIDE

    Click here

  4. INSTALL REAR SEAT SHOULDER BELT GUIDE LH

    Click here

  5. INSTALL REAR SEAT SHOULDER BELT GUIDE RH

    Tech Tips

    Use the same procedure described for the LH side.

  6. INSTALL REAR SEAT WIRE

    Click here

  7. INSTALL REAR SEAT CENTER ARMREST ASSEMBLY

    Click here

  8. INSTALL BENCH TYPE REAR SEATBACK ASSEMBLY

    Click here