SEAT MEMORY SWITCH INSPECTION

PROCEDURE


  1. INSPECT SEAT MEMORY SWITCH LH


    1. Check the resistance.


      1. A01QBHRC01
        *a

        Component without harness connected

        (Seat Memory Switch LH)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 (MMRY) - 5 (E) SET switch pressed Below 1 Ω
        2 (1) - 5 (E) Switch 1 pressed
        3 (2) - 5 (E) Switch 2 pressed
        4 (3) - 5 (E) Switch 3 pressed

        If the result is not as specified, replace the seat memory switch LH.

  2. INSPECT SEAT MEMORY SWITCH RH


    1. Check the resistance.


      1. A01Q9RDC01
        *a

        Component without harness connected

        (Seat Memory Switch RH)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 (MRY) - 5 (E) SET switch pressed Below 1 Ω
        2 (M1) - 5 (E) Switch 1 pressed
        3 (M2) - 5 (E) Switch 2 pressed
        4 (M3) - 5 (E) Switch 3 pressed

        If the result is not as specified, replace the seat memory switch RH.