FRONT SEAT ASSEMBLY INSPECTION

PROCEDURE

1. INSPECT FRONT SEAT ADJUSTER ASSEMBLY LH

   
   

   1. Check the operation of the slide motor.

      
      
      1. 

         *a	Component without harness connected (Front Seat Adjuster Assembly LH (Slide Motor))

         Apply battery voltage to the slide motor connector, and check that the front seat adjuster assembly LH operates smoothly as follows.

         OK
         Measurement Condition Specified Condition Battery positive (+) → Terminal 4 Battery negative (-) → Terminal 1 Forward Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 4 Backward

         If the result is not as specified, replace the front seat adjuster assembly LH.

   2. Check the operation of the front vertical motor.

      
      
      1. 

         *a	Component without harness connected (Front Seat Adjuster Assembly LH (Front Vertical Motor))

         Apply battery voltage to the front vertical motor connector, and check that the front seat adjuster assembly LH operates smoothly as follows.

         OK
         Measurement Condition Specified Condition Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1 Upward Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 2 Downward

         If the result is not as specified, replace the front seat adjuster assembly LH.

   3. 

      *a	Component without harness connected (Front Seat Adjuster Assembly LH (Lifter Motor))

      Check the operation of the lifter motor.

      
      

      1. Apply battery voltage to the lifter motor connector, and check that the front seat adjuster assembly LH operates smoothly as follows.

         OK
         Measurement Condition Specified Condition Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1 Upward Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 2 Downward

         If the result is not as specified, replace the front seat adjuster assembly LH.

2. INSPECT FRONT SEAT ADJUSTER ASSEMBLY RH

   
   

   1. Check the operation of the slide motor.

      
      
      1. 

         *a	Component without harness connected (Front Seat Adjuster Assembly RH (Slide Motor))

         Apply battery voltage to the slide motor connector, and check that the front seat adjuster assembly RH operates smoothly as follows.

         OK
         Measurement Condition Specified Condition Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1 Forward Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 2 Backward

         If the result is not as specified, replace the front seat adjuster assembly RH.

   2. Check the operation of the front vertical motor.

      
      
      1. 

         *a	Component without harness connected (Front Seat Adjuster Assembly RH (Front Vertical Motor))

         Apply battery voltage to the front vertical motor connector, and check that the front seat adjuster assembly RH operates smoothly as follows.

         OK
         Measurement Condition Specified Condition Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1 Upward Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 2 Downward

         If the result is not as specified, replace the front seat adjuster assembly RH.

   3. Check the operation of the lifter motor.

      
      
      1. 

         *a	Component without harness connected (Front Seat Adjuster Assembly RH (Lifter Motor))

         Apply battery voltage to the lifter motor connector, and check that the front seat adjuster assembly RH operates smoothly as follows.

         OK
         Measurement Condition Specified Condition Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1 Upward Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 2 Downward

         If the result is not as specified, replace the front seat adjuster assembly RH.

3. INSPECT FRONT SEATBACK FRAME SUB-ASSEMBLY LH

   
   

   1. Check the operation of the reclining motor.

      
      
      1. 

         *a	Component without harness connected (Front Seatback Frame Sub-assembly LH (Reclining Motor))

         Apply battery voltage to the reclining motor connector, and check that the front seatback frame sub-assembly LH operates smoothly as follows.

         OK
         Measurement Condition Specified Condition Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1 Forward Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 2 Backward

         If the result is not as specified, replace the front seatback frame sub-assembly LH.

4. INSPECT FRONT SEATBACK FRAME SUB-ASSEMBLY RH

   
   

   1. Check the operation of the reclining motor.

      
      
      1. 

         *a	Component without harness connected (Front Seatback Frame Sub-assembly RH (Reclining Motor))

         Apply battery voltage to the reclining motor connector, and check that the front seatback frame sub-assembly RH operates smoothly as follows.

         OK
         Measurement Condition Specified Condition Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1 Forward Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 2 Backward

         If the result is not as specified, replace the front seatback frame sub-assembly RH.