LUMBAR SUPPORT ADJUSTER ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT LUMBAR SUPPORT ADJUSTER ASSEMBLY LH


    1. Check the operation of the lumbar motor.


      1. A01Q8S0C19
        *a

        Component without harness connected

        (Lumbar Support Adjuster Assembly LH)

        Apply battery voltage to the lumbar motor connector, and check that the lumbar support adjuster assembly LH operates smoothly as follows.

        Standard Resistance
        Measurement Condition Specified Condition

        Battery positive (+) → Terminal 1

        Battery negative (-) → Terminal 2

        		 Forward

        Battery positive (+) → Terminal 2

        Battery negative (-) → Terminal 1

        		 Backward

        If the result is not as specified, replace the lumbar support adjuster assembly LH.